Why and How Ballerinas Break In Ballet Pointe Shoes

2012-Nutcracker-SF-Chronicle

With the holidays upon us, ballerinas of all ages become a bit more inspired. One of the primary reasons is that various renditions of The Nutcracker are being interpreted and performed widely, from local community dance groups to large scale professional productions. Whether you are “into” ballet or not, you simply cannot help being sucked into this magical story.

For me, The Nutcracker experience has now come full circle. I have been going to The Nutcracker ever since I was a child, seeing it first in Chicago and then in San Francisco. It was a family tradition for my grandmother, my parents and me. And it now has become a tradition with my own family and my daughters. To complete the circle, for the past 2 years, my oldest daughter who is a student at the San Francisco Ballet School, has been casted as Clara in the San Francisco Ballet‘s production.

2012-Nutcracker-SF-Chronicle

As is customary in every ballet performance, ballerinas literally dance their shoes off in each production. It is common for the principal dancers to wear out a new pair of pointe shoes in a single performance. My daughter seems to go through a pair of pointe shoes every week or so.

DSC06159

The pointe shoe is the ballet dancer’s primary equipment. It allows them to be on their toes, spin (pirouette), balance and simply perform. Much like a new baseball mitt, a pair of cleats or racecar engine, pointe shoes must be broken in to reach the perfect state. However, unlike the traditional breaking in process that happens over time, many ballerinas practically destroy their brand new pointe shoes even before dancing in them for the first time. And I should know, I have “broken in” quite a few pairs now.

HTD-Pointe-Shoes-breaking-in-473

Because this entire concept of “unmaking” or breaking in the pointe shoes is a bit counterintuitive, I thought that I would walk through this “break in” process – at least the way that my daughter wants her shoes broken in.

An important thing to note though, every ballet dancer breaks in their shoes a bit differently. Some do all or even more of the steps outlined below while others do only a few things shown. A good dance instructor can help the dancer figure out the best process for to do. There are also plenty of videos online that can help as well. As there are many different ways to break in a pair of pointe shoes ranging from simple bending to full fledged destruction, be sure to talk to teachers and instructors as well as more seasoned, veteran dancers. Most importantly, it is what the dancer feels the most comfortable with. Some dancers don’t do much with their shoes while others truly customize them. The steps that I show below might not be the best for other dancers so be sure to talk to your teacher or instructor.

Lastly, before you go and hack up a new pair of $100 pointe shoes, be sure you know what you are doing and what exactly you want to do. And if the customization process involves knives, scissors or needles and you are a child, be sure to have adult supervision!

Oh, and be sure to scroll down to the end of this article for the video slideshow of this process.

The Equipment

First, you will need to have a pair of new pointe shoes. My daughter has tried:

Each of these pointe shoes has a different feel, some are harder, others softer. Some are narrow while others are wide. Be sure to get professionally fitted (unless you know exactly which make, style and size you want). Some shoes have very hard shanks while others are much more soft. Some boxes (the area where the toes are and the dancer “stands” on) are harder or wider while others not. Again, it depends on what you want, and a dancer may break in different pointe shoes distinctly.

The equipment that I used to break in my daughter’s pointe shoes were pretty basic. Here’s the shortlist:

  • Leatherman (Wave)
  • Jet Glue
  • Needle
  • Lighter
  • Pen/Pencil/Marker
  • Cloth tape (or Duct Tape; a stronger tape)

I really only had one main “tool” that I use each and every time, namely a Leatherman. Specifically, the Leatherman Wave. I have had this multi-use tool for many years and for this particular break-in process, it is fantastic. For the pointe shoe customization process, I use: the pliers, the knife, the serrated knife, the saw (sometimes) and the scissors.

HTD-Pointe-Shoes-breaking-in-504

The Jet Glue is used to harden any part of the shoe and, as my daughter says, makes the shoes last just a little bit longer. My daughter uses the blue bottle (the “instant” version).

HTD-Pointe-Shoes-breaking-in-508

The needle (and appropriate thread) is used to sew on the ribbons. And the lighter is used to burn back any of the frayed edges of the ribbons or the cut satin of the pointe shoes themselves. I will go into greater detail below.

Oh, and you need time. I usually spend anywhere 20 minutes or more doing the process specific to my daughter’s shoes.

Breaking In Pointe Shoes

Below is the typical process that I take when breaking in my daughter’s pointe shoes. Remember, this process is customized based on her requirements. If you are looking for a how-to on this process, work with an expert on this as your customizations may be completely different. However, I do know that there are many dancers who follow a process similar to the one listed below. Ready?

First you need to fit the new shoes properly. These pointe shoes are hand-made so they are not entirely identical. Also, people actually have different sized-feet. So before you start any customizations, see which shoe feels better on specific feet.

HTD-Pointe-Shoes-breaking-in-467

Try them flat footed as well as en pointe (above).

HTD-Pointe-Shoes-breaking-in-472

Once you figure out which shoe fits best on the feet, be sure to label them inside. You can see the L and R indicated below.

HTD-Pointe-Shoes-breaking-in-484

Depending on the dancer’s preference as well as the stiff and hardness of the box (the front area of the shoes), you may need to break in the box. This is your chance to get your aggressions out (and typically it is better to get an adult who weighs more than the dancer to do this). You simply need to crush the box. Here’s the before:

HTD-Pointe-Shoes-breaking-in-474

…that is my lovely socked foot…

HTD-Pointe-Shoes-breaking-in-476

…and this is the result.

HTD-Pointe-Shoes-breaking-in-477

At this point, my daughter likes to have the back portion of the shank cut and removed (this process is called “3/4ing”). Not all dancers do this. Some simply bend and condition the shank to their liking. As you saw in the previous picture, she draws lines on the shank to indicate where I should cut. This depends on where your arch is.

HTD-Pointe-Shoes-breaking-in-485

This is where the sharp blade of the Leatherman comes in handy. Depending on how hard the shank is, you can use a simple blade but sometimes I have had to use the serrated blade of the Leatherman to cut through stiffer shanks.

HTD-Pointe-Shoes-breaking-in-486

And sometimes you have to do it in batches, cutting and ripping out the shank.

HTD-Pointe-Shoes-breaking-in-490HTD-Pointe-Shoes-breaking-in-491

Depending on the maker of the shoes, the shank may be anchored to the sole with a small nail. Be sure to look for those and remove them.

HTD-Pointe-Shoes-breaking-in-494HTD-Pointe-Shoes-breaking-in-495

Once the shank is out, the sole can be bent more easily and conditioned a bit more. Here my daughter is bending the sole to her liking. This is completely up to the dancer though.

HTD-Pointe-Shoes-breaking-in-501

Repeat this process with the other shoe.

This next step also depends on your preferences. As part of this break-in process really weakens the shoe to make it more supple and comfortable, you may want to strengthen the box a bit. To do this, my daughter pours Jet Glue (the quick drying one) down into the box.

HTD-Pointe-Shoes-breaking-in-514

It dries pretty quickly so don’t pour in too much!

One thing that a ballerina quickly become is a seamstress as they need to sew on the various ribbons onto the shoes. Think of the ribbons as “shoelaces” around the ankles.

HTD-Pointe-Shoes-breaking-in-522

Sometimes you need the Leatherman to pull the needle through.

HTD-Pointe-Shoes-breaking-in-524HTD-Pointe-Shoes-breaking-in-525

The sewed ribbons typically look like this.

HTD-Pointe-Shoes-breaking-in-526

Following is another step that is optional, that is, to cut away the satin around the toe (the pointe). She does this to make the shoes a bit less slippery.

HTD-Pointe-Shoes-breaking-in-528

It sort of feels like peeling an apple.

HTD-Pointe-Shoes-breaking-in-536

Once you go a couple of times around with the knife, the satin can be pulled off.

HTD-Pointe-Shoes-breaking-in-529HTD-Pointe-Shoes-breaking-in-530

The result is a bit ugly but it’s more about function than appearance.

HTD-Pointe-Shoes-breaking-in-531

Now it is time for some fire. You use the lighter to burn down (carefully) the frayed edges of satin on the shoes or the ribbons.

HTD-Pointe-Shoes-breaking-in-533

HTD-Pointe-Shoes-breaking-in-532

The breaking in process is almost complete at this point (at least on my daughter’s shoes). Because the cut shank can sometimes be uncomfortable, my daughter tapes up the exposed area inside the shoe. She uses cloth tape for this. But you can also use a stronger tape like duct tape.

HTD-Pointe-Shoes-breaking-in-551HTD-Pointe-Shoes-breaking-in-552

HTD-Pointe-Shoes-breaking-in-553

Lastly, trim the ribbons so you don’t have extra and your knot remains small.

HTD-Pointe-Shoes-breaking-in-543

With this last step, you have thoroughly destroyed broken-in the pointe shoes!

HTD-Pointe-Shoes-breaking-in-548HTD-Pointe-Shoes-breaking-in-549

HTD-Pointe-Shoes-breaking-in-546

That wasn’t that difficult, right? Well, considering that you just took an expensive ($100) pair of pointe shoes and glued, cut, burned and hacked them up, it sometimes is a bit difficult to stomach. But, as I mentioned, pointe shoes are a ballet dancers primary piece of equipment so this type of break-in and customization shouldn’t seem that out of the ordinary.

I have all of the pictures from this process over on my Flickr set. And you can view the video slideshow below:

Again, I have to stress that the process that I outlined above is very specific to my daughter’s preference. You should get opinions from your teachers or instructors or from the people who sell pointe shoes. This is a very individual preference so what you end up doing may be dramatically different.

My daughter, Natasha, and I are happy to answer any questions you may have about this process so be sure to leave a comment!

HTD says: Does the breaking in process for pointe shoes surprise you?

[amazonproduct=B0002H49BC]
[amazonproduct=B0006O1IG0]

- Advertisement -
- Advertisement -
- Advertisement -

13 Responses

  1. Haha, I actually try hard not to over promote. As Dance Moms has such a negative view (because of that damn TV show), I’m hoping that “dance dads” don’t follow suit. I would rather promote as “proud daddy”. Parent need to be proud of their child’s accomplishments but not over the top, at least in my opinion. I am just a full supporter of dads becoming more involved with their kids!

  2. i remember my dad breaking my first ballet slippers Russian Pointe i thought my dad was crazy i cried and threw a fit and told him i was not ever talking to him again but then he gave them back and my feet did get as messed up next time i hit the floor

  3. Manipulation of this degree makes me absolutely crazy as a former dancer and now as a teacher and professional pointe shoe fitter. There are too many pointe shoe brands out there with so many different shank and box strengths that I find it hard to believe that this much destruction is necessary anymore.

  4. I do believe that customization is extremely personal. Just the way there are many types of pointe shoes available, how you break them in is equally as personal. My daughter has actually tried many different shoes as well as many different ways to break them in (from nothing to extreme). As she logs 5-7 hours a day, 6 days a week dancing, she knows what works and what doesn’t. She talks to various professional dancers at SF Ballet, gets their recommendations as well as advice from her teachers. Some dancers don’t do anything while others do a lot. I believe it is up to the dancer to feel what works best for them.

  5. I loved this description of breaking in shoes. One of my favorite scenes in ballet movies (Black Swan, Center Stage) is the scene where the ballerina breaks in her shoes. I don’t know why, I just love these scenes!

  6. The choice of shoes should be careful, beside the design of shoes that should be comfortable, if you don’t find such quality in your shoes, then you will catch yourself in tiring trouble, you should be careful while buying your shoes.

  7. I discovered Center Stage a week ago and on my second viewing of this amazingly fun and memorable movie I paused at that very scene to google this and voila! I ended up here!

  8. Interesting post. Here is a new brand of pointe shoes that you don’t need to break in
    Siberian Swan pointe shoes with Active Arch Support technology. Plastic shank (not box), no need to break in. It is longer lasting shoes
    https://www.siberianswan.com/

  9. @alexmakeapointe:disqus, pointe shoes, as I have learned from my daughter, are highly personal. In fact, depending on the shoe maker, customizations can vary. Also, my daughter has been changing how she “breaks in” (via modifications to the shank, etc.) her pointe shoe. I cannot speak from experience, but I would think that all shoes have some sort of break in period as they are very personal.

  10. @hightechdad:disqus Yes, of course. The thing is that you only break in those shoes that are made from standard materials like cardboard, cotton. Once you break them in they don’t last long.
    Siberian Swan shank is made off plastic, you cannot and should not break the plastic. It retains its resilience, elasticity, and flexible out of the box.
    It is different technology.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Other articles of interest

Global Product Review Disclosure

Disclosure: This is a global disclosure for product review articles on HighTechDad. It does not apply to Automobile reviews and there are other exceptions. Therefore, it may or may not be applicable to this particular article. I may have a material connection because I may have received a sample of a product for consideration in preparing to review the product and write this or other content. I was/am not expected to return the item after my review period. All opinions within this and other articles are my own and are typically not subject to the editorial review from any 3rd party. Also, some of the links in the post above may be “affiliate” or “advertising” links. These may be automatically created or placed by me manually. This means if you click on the link and purchase the item (sometimes but not necessarily the product or service being reviewed), I will receive a small affiliate or advertising commission. More information can be found on my About page.

About HighTechDad

Michael Sheehan (“HighTechDad”) is an avid technologist, writer, journalist, content marketer, blogger, tech influencer, social media pundit, loving husband and father of 3 beautiful girls living in the San Francisco Bay Area. This site covers technology, consumer electronics, Parent Tech, SmartHomes, cloud computing, gadgets, software, hardware, parenting “hacks,” and other tips & tricks.

Recent Articles

Explore Categories

– Advertisement –

Shop Now!

My Favorite Setapp Apps

Affiliates

Wireless in Bulk? Genius! Shop Budget-Friendly, Unlimited Talk & Text Plans at MintSIM.
  • Shop Mount-It!
  • Shop Incase Now!

– Advertisement –

Intellifluence Trusted Blogger
Shop HighTechDad-reviewed products
– Advertisement –